--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402697

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402696

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402694

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402693

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402692

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402691

warning: visibility attribute not supported in this configuration; ignored

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402688

Oops, we were disabling the screensaver before checking SDL_VIDEO_ALLOW_SCREENSAVER

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402685

When unicode translation is ON, pressing the escape key raise an NSBeep()
because the NSTextView interprets the key as a special command (in that case
impossible to interpret)... The NSTextView instance should replaced by
something subclassed so that doCommandBySelector: does nothing.

Example code :

@interface SDLTranslatorResponder : NSTextView
{
}
- (void) doCommandBySelector:(SEL)myselector;
@end

@implementation SDLTranslatorResponder
- (void) doCommandBySelector:(SEL) myselector {}
@end

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402683

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402682

Fixed arguments used with sdl-config in sdl.m4

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402680

Take the min and max values into account.

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402678

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402676

Support escaped quotes on Win32 command lines.

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402675

XRefreshKeyboardMapping() is only available when X_HAVE_UTF8_STRING is defined.

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402674

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402672

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402671

Check all joysticks instead of stopping if one has been removed.

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402669

Added X1/X2 button constants

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402667

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402666

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402665

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402664

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402663

OpenBSD (and possibly others) do not have executable memory by default,
so use mprotect() to allow execution of dynamic assembly block.

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402662

Searching the installed man pages for SDL functions fails, e.g.
  man -k SDL_ |grep Video
After investigating this I found that "makewhatis", the tool that generates
the "whatis" database, reads the SDL_* man pages, but doesn't produce
entries in the "whatis" database for the SDL_* man pages.
After some more debugging I found the reason is a missing space.
After editing SDL_Init.3(.gz) and replacing
   SDL_Init\- Initializes SDL
with
   SDL_Init \- Initializes SDL
everything works fine.
After running "makewhatis" I can successfully do a
   man -k SDL_
and SDL_Init is listed in the output.

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402660

When running boswars: http://www.boswars.org/ on a machine with intel
integrathed graphics it crashes when it tries to play the initial theora
splashscreen video:
X Error of failed request:  BadAlloc (insufficient resources for operation)
  Major opcode of failed request:  140 (XVideo)
  Minor opcode of failed request:  19 ()
  Serial number of failed request:  25
  Current serial number in output stream:  26
boswars: xcb_xlib.c:41: xcb_xlib_lock: Assertion `!c->xlib.lock' failed.
Aborted

I recognized this problem from a few years back, when I encountered it while
working on the Xv blitter for xmame. The problem is that for some reason
creation the Xvport and XvImage succeeds, and failure (lack of resources / hw
capability?) is only indicated during the first XvPut[Shm]Image. I've written a
patch for SDL using the work around for this I developed for xmame (and which
is still used successfully in xmame after many years of usage).

I'll admit it isn't very pretty, but after investigating several possibilities
this was the best option, any other fixes would need changes to the SDL api and
abi.

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402659

From: John Bartholomew
Subject: [SDL] SDL Semaphore implementation broken on Windows?
Hi,

Over the past couple of days, I've been battling with SDL, SDL_Mixer and SMPEG to try to find an audio hang bug.  I believe I've found the problem, which I think is a race condition inside SDL's semaphore implementation (at least the Windows implementation).  The semaphore code uses Windows' built in semaphore functions, but it also maintains a separate count value.  This count value is updated with bare increment and decrement operations in SemPost and SemWaitTimeout - no locking primitives to protect them.

In tracking down the apparent audio bug, I found that at some point a semaphore's count value was being decremented to -1, which is clearly not a valid value for it to take.

I'm still not certain exactly what sequence of operations is occuring for this to happen, but I believe that overall it's a race condition between a thread calling SemPost (which increments the count) and the thread on the other end calling SemWait (which decrements it).

I will try to make a test case to verify this, but I'm not sure if I'll be able to   (threading errors being difficult to reproduce even in the best    circumstances).

However, assuming this is the cause of my problems, there is a very
simple fix:
Windows provides InterlockedIncrement() and InterlockedDecrement()
functions to perform increments and decrements which are guaranteed to be atomic.  So the fix is in thread/win32/SDL_syssem.c: replace occurrences of --sem->count with InterlockedDecrement(&sem->count); and replace occurrences of ++sem->count with InterlockedIncrement(&sem->count);

This is using SDL v1.2.12, built with VC++ 2008 Express, running on a
Core 2 duo processor.

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402658

The minimum PPC SDK is 10.3.9

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402656

From: Calvin Vette
Subject: Fix to compile SDL-1.2 SVN on OS X Leopard

I found I needed to add a conditional check for Leopard to compile
cleanly on 1.2-SVN (20071114):

#include <AudioUnit/AudioUnit.h>
#ifdef AVAILABLE_MAC_OS_X_VERSION_10_5_AND_LATER
#include <AudioUnit/AUNTComponent.h>
#endif

where there is now just:
#include <AudioUnit/AudioUnit.h>

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402654

From: "Marco Lopes"
Subject: Compiling with Intel compiler fails

I~Rve recently bought the Intel Compiler 10 for another project and decided
to compile SDL with it as well.

I was very surprised when it failed to compile because of the function:

Error      5              error: label "endS16" was referenced but not
defined   ..\..\src\audio\SDL_mixer_MMX_VC.c

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402652

Trackpad scrolling on OSX is broken. Scrolling up/slightly right gets
translated into a Down event in SDL. The following patch fixes this extremely
irritating issue:

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402650

Borland compilers have the alloca() prototype in malloc.h as with WATCOM.

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402648

If an app requests a 24-bit opengl mode on a machine with a 32-bit desktop with
the windib video backend, then when exiting fullscreen the desktop resolution
is not restored

The reason this is, is because the windib backend restores the desktop
resolution when exiting fullscreen in DIB_SetVideoMode when it finds that the
last request was for fullscreen by checking the original flags on the video
surface. However, if the bits per pixel requested is different than current
surface, the video surface is recreated and the original video flags are lost.
So the check to see if we were exiting fullscreen fails.

below is a patch to SDL_dibvideo.c that solves the problem by using the
original flags in all cases.

thanks!

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402647

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402645

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402644

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402643

From: Christopher GAUTIER <krys via.ecp.fr>
To: sdl@lists.libsdl.org
Subject: [SDL] SDL_INPUT_LINUXEV vs SDL_JOYSTICK_LINUXEVHello all,

There seems to be a slight inconsistency between the SDL_INPUT_LINUXEV
define (used in src/joystick/linux/), and SDL_JOYSTICK_LINUXEV defined
in include/SDL_config.h.

SDL_JOYSTICK_LINUXEV is never used, and SDL_INPUT_LINUXEV is not
mentioned in SDL_config.h.in (though set by the ./configure script).
This has the unfortunate effect of breaking the joystick detection on linux
boxes where /dev/input/event* is defined, but not /dev/(input/)?js*.

Trivial patch included.

Cheers.

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402640

  Fixes Bugzilla #487.

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402637

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402635

 the attribute on X11.

--HG--
branch : SDL-1.2
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/branches/SDL-1.2%402578